SPARE PARTS

KT series high performance turbines have shot blasting machine spare parts including blasting wheels provided with eight throwing blades locked into the wheel double-disc. The double-disc wheel offers the following advantages:

Improved abrasive flow for faster cleaning cycles

Direct mounted motors or spindles eliminate

manual wheel alignment issues

Easy front of housing access to runner head

Optional replaceable, long-lasting cast liners

Integrated dual labyrinth hub seal for superior abrasive containment

T-nuts assist in housing replacement

Integral U-shaped feed spout clamp for improved adjustment and assembly

Low speed and high speed direct drive motors

Direct coupled spindle drives allow for re-use of existing motors

Less part wear due to greater concentricity and more precise alignment

We are shot blasting spares manufacturers and we have many blasting machine parts for sale.

Specification
Type KT  3.6/3.8

Type KT4.2/ 5.0
Driving power (kW)
7,5
11
15
18.5
twenty two
30
75
7,5
Nominal speed (rpm)
2980
2980
2980
2680
2680
2680
2680
2 860
Drive  type
Direct-drive
Direct-drive
Direct-drive
Belt-drive
Belt-drive
Belt-drive
Belt-drive
Belt-drive
Belt-drive
Blasting wheel Ø mm
360/380
360/380
360/380
420/500
500
500
500
330/380
No. of blades
8
8
8
8
8
8
8
6
Blade width (mm)
55
55
55
55
75
75
75
55
Housing material
Steel/ manganese steel
Steel/ manganese steel
Lining material
Hight chrome casting iron
Hight chrome casting iron
Impeller material
tempered tool steel
tempered tool steel
Control cage material
Hight chrome casting iron
Hight chrome casting iron
Feed tube material
steel casting
steel casting
Throwing blade material
cast iron
cast iron

Direct-drive blasting turbines is a new type having advantages of high efficient blast turbines, elegant appearance, compact structure, low noise level, energy-efficient, environmental-friendly.Direct-drive blasting turbines

Belt-drive blasting turbines

Belt-drive blast turbines are conventional, large abrasive flow rate, good cleaning effect, etc. It is an essential part of the large shot blasting machine.

Blasting blade, blasting impeller, control cage made of high-chromium wear-resistant cast iron material, which greatly extends the service life.

The partial-thickness op guard, side guard, and end guard reach to 70mm, and the thickness of the ordinary guard is generally 12mm,  greatly improved the wear resistance and service life of the guard plate, reducing the frequency and time of repair and replacement.

As one of the most professional shot blasting equipment manufacturers in China, QINGGONG MACHINERY’s activity is the design, manufacture, sales of automatic roller shot blasting machine, sandblasting room and punching machine and over more than 40 years of experience. RFQ today!

评论

发表评论

此博客中的热门博文

Rotary Table Shot Blasting Machine

图片
  Rotary shot blasting machine  is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface, removing casting sand and filings, consolidating the surface (micro handling), roughing the surface before colouring, etc.   rotary table shot blasting machine  are split into single rotary table type shot blasting machine  and swing table shot blasting machine . Swing table blast machine  efficiency is much higher than the single rotary table shot blasting machine for sale .   Rotary Table Shot Blast Machinery Systems Treated objects are loaded on a perforated rotating table. A big door, provide simple and fast loading. This shot blasting for sale can have the rotary blast table  fitted to the machine's door, which enables loading with a hoist or fork-lift truck to the entire surface of the table. The double rotary table blast machine  al...
阅读全文

Anchor Chain Shot Blasting Machine

图片
  The working principle for anchor chain shot-blasting machine is mainly by numerous high speed abrasive flow projection to the anchor chain surface, which blast cleaning the oxides and Surface attachment from the anchor chain, and by making the surface plastic deformation to effectively improve the chain's fatigue strength and fracture resistance of corrosion.   SHOT BLASTING MACHINE   The working principle for shot of anchor chain   blasting machine is mainly by numerous high speed abarsive flow projection to the anchor chain surface, which blast cleaning the oxides and Surface attachment from the anchor chain, and by making the surface plastic deformation to effectively improve the chain's fatigue strength and fracture resistance of corrosion. Main composition and structure characterized by shot blasting Chamber, sealed rooms, elevators, separators, screw conveyors, throwing Assembly, Abrasive reclaim system, elevator platform, inbound and outbound guide wheel uni...
阅读全文

Scaffolding Shot Blast Cleaning Machine to Remove Rust

图片
For scaffolding, our company designs two types of shot blasting machine to clean them. One, hanger type shot blasting machine[1]. Another, roller conveyor shot blasting machine[2]. There are advantages for both kinds of blasting machine. Hanger type blast cleaning machine is suitable for short scaffolding, and it needs some times to load and unloading the scaffolding from the hanger. It needs to clean one group then unloading it, then clean next group. It can not do blasting continuously. Roller conveyor shot blast cleaning machine is suitable for all kinds of scaffolding. It is very easy to loading and unloading the scaffolding, no need to stop to work. And it can achieve blasting continuously. Generally, the working efficiency of scaffolding roller conveyor shot blasting machine is higher than scaffolding hanger type shot blast cleaning system . Hope this two type shot blasting machine can meet your needs. If you are interested in our machine, please feel free to contact us. A...
阅读全文